6 x 6 Unicorn Treat Holder

Hi Stampers!

Isn't the stamp set Zany Zebras just the cutest??? Zany Zebras or should I say Unicorns??? I turned them into adorable unicorns!

I used my black marker to out line my rubber stamp excluding the stripes of the zebra.  I colored them with my gray blends. I cut a gold horn from some left over gold glimmer paper, but you could use gold foil paper.

I made unicorns to go with these Little Debbie Unicorn snacks.  This little box in a bag is so easy to make especially with the Playing with Pattern 6" x 6" Designer Series Paper. 

With a 2 1/2" x 3" piece of card stock, score 3/4" on all four sides and make a box bottom out of it.  Look how cute these are. Make sure to use a strong adhesive.

On a 6" x 6" piece of DSP, place tear tape on the left side and the bottom. Remove the backing of the tape. Align the bottom of the box and DSP and wrap the DSP around the bottom of the box, starting on the right side of the DSP.  Once the DSP is wrapped all the way around the bottom of the box, carefully press the left side that had the tear tape onto the right side of the DSP.  It will look like a tube.

Hole punch the top to put the ribbon on.  If you like, lightly press the edges together to use a corner rounder.  The circles were cut with the stitched dies and adhered with dimensionals.

Hope you enjoyed todays projects.  Until next time,

 

Designer Series Paper Cards

Hi Stampers,

Are you looking for ways to use your Designer Series Paper? You know me, I am trying to use up all the DSP I have. With two sheets of Designer Series Paper I could get 14 cards. #iwillusemyprettypaper 

 The first sheet I cut into 4" x 12" strips. I then cut down the strips to 4" x 3" for a total of 12 rectangles.

The second sheet cut 4" x 12" strips.  The first strip I cut two pieces 4" x 3" and the rest of the strip was cut 4" x 2" for a total of five pieces from the first strip.  The remaining 4" x 12" pieces were cut down to 4" x 2".

Next, I adhered them to a card base.  Added a little ribbon or card stock for a strip over the seam. Whisper White was placed on the inside for various sentiments.

I hope you enjoyed this project and that you will be inspired to use your pretty paper.

Until next time,

Hand Sanitizer for the Holidays

Hi Stampers!

   Monday (previous post) I shared with you packaging for 2 oz hand sanitizer. Since this is an item I will need all year long, I figured I would make some holders for all the holidays.  Autumn, Halloween, and Christmas are what I have made so far.

Here I have used many products from the Magic in the Night Suite.  I love the Metallic Mesh ribbon. It almost looks like spider webs.

Here I have used Plaid Tidings DSP. I used The Pine Tree punch for the hat, which I embossed with Greenery embossing folder to make it look like a knit cap. The Christmas tree and beard are from In the Woods dies. The snow on the tree is the Chalk Marker. I had some embellishments from the spring catalog, so I used them for lights/bulbs on the tree. It's Christmas so this little gnome is wearing is shiny dress shoes made from the black glitter paper.

What holidays would you make packaging for?

Hope you enjoyed this project.  Until next time,

Back to School Sanitizer Packaging

Hi Stampers!

Are you headed back to school soon or have you already started? 

I am headed back to school today for a week long professional development. Guess what we will need a lot of besides masks, that's right! Hand sanitizer and lots of it!  Why not make some cute packaging for it!?!

I saw another demonstrator make a box very similar to this.  Hers was to lay horizontally with a large lid.  I switched it up to stand tall and open at the top. 

You can make two of these with one sheet of card stock and a little Designer Series Paper.  #iwillusemyprettypaper I had a little left over from last years Gather Together Suite. I love the leaves in this bundle. I used the dies to cut and emboss some leaves from Rich Razzleberry and Cajun Craze card stock. Then, to the Cajun Craze leaf I added gold Wink of Stella which has retired.  The clear with just a touch of shimmer would be pretty as well but I am trying to use up as much product as I can.

The verse is stamped on Very Vanilla card stock with Rich Razzleberry ink and added leaves with Cajun Craze ink.  I just used my paper snips to cut the tag out. I closed the box with some linen thread.

   To make the box, cut card stock at 4 1/4" x 11".  On the short side score 1" and 3 1/4". On the long side score 1", 5", 6", 10".  Snip at the score lines with small miters. I cute the corners on the top to make the box close easier.  

   On the top flap I used the snowman builder punch to cut a notch to make it easier to open. You could use a small circle punch or a small circle die if you like.

   Here is where I place adhesive tape.  Any strong tape or glue will work. I turned the small flaps in, folded up the sides without any adhesive, then turned up the flaps with adhesive. I make that the back of my box. 

I covered the sides with DSP. Cut two at 3 3/4" x 2" (these are the front and back). Cut two 3 3/4" x 3/4" (these are the two sides).

I have a feeling I will be buying hand sanitizer in bulk this year and making lots of these little boxes.

Hope you enjoyed this project.  Until next time,

Consume Cookies & Be Awesome Cookie Box

Hi Stampers!

I think my favorite new set from the Annual Catalog is Nothing Better Than!! Cookies, Chocolate, Coffee and Cocktails.  How can you go wrong with a set like that? AND there are coordinating dies!

I have used lots of new product for this project. Plaid Tidings Designer Series Paper, which I just LOVE! The Nothing Better Than bundle. Cinnamon Cider, Whisper White, and Early Espresso card stock. Linen thread.

Here is the inside of this cookie box. It holds a snack size package of cookies.  To make the box cut card stock at 7 3/8" x 6 1/2".  Score all four sides at 3/4". On the long side score at 3 1/4"  and 4".

Snip the card stock to the edges and miter just a little bit off the flaps. Here is what it looks like when you finish with the cuts. 

I used Tombo glue to glue the flaps to make a base and the cover.

The Designer Series Paper is cut 2 1/4" x 4 3/4".  I stamped and die cut the cookies and used dimensionals to pop them up just a bit. 

I can see giving these to coworkers on a Friday after a long week.

I hope you enjoyed this project.  Until next time,

A Grand Birthday

 

Hi Stampers!

 So what do you think of this handsome card I made for a 15 year old boy?  It has to be "handsome" because teenage boys don't like "cute" things 😀.

I love the stamp set A Grand Kid. I know it is made for grandchildren, however, I just love the sassy sayings. I plan on using them for nieces and nephews. I will just leave out the words Grand from any of the verses.

Here is the inside of this card.  Isn't it adorable???

I used Plaid Tidings Designer Series paper, Blackberry Bliss card stock and ink, Pretty Peacock and Whisper White card stock. And for a little "masculine" bling I used the new Iridescent Pearls. These pearls aren't just for Halloween!

I hope you enjoyed this project. Until next time,

 

Thinking of You

Hi Stampers!

I think I am just about caught up with my cards using items from the spring catalog.  I used up some of my Designer Series Paper from the Best Dressed suite.

Luckily, one of my favorite bundles, So Sentimental, has carried over!  The stitched dies in the bundle are awesome!

Later this week I will have some new cards with some Designer Series Paper from the August-December catalog.

Until next time,

Sending Healing Hugs Starburst

Hi Stampers!

I used the So Sentimental Bundle and Starburst technique to create this card.

All the pieces start off as rectangles. I cut Designer Series Paper at:

Cut 1: 4 1/2" x 1 1/2"

Cut 1: 4" x 1 1/2"

Cut 2: 3" x 1 1/2"

Cut 2: 2" x 1 1/2"

Then all the rectangles are cut on the diagonal.  I placed all the points on a central point off to the upper left hand side of my card made from Blackberry Bliss card stock. Once I decided where I wanted them, I glued them down with Tombo glue. I cut off any over hang. 

I stamped the verse with Blackberry Bliss ink on Whisper White card stock. I cut it with the Layering Circle dies.  I used the next size die to make a scalloped Blackberry Bliss layer for the circle.

I hope you have enjoyed today's project.

Until next time,

Best Dressed A Little Hello

Hi Stampers!

I think I will be all caught up with week with showing you things I created during the summer.  I had Designer Series Paper I wanted to use up.  Remember I will use my pretty paper!

I cut a 2" strip of DSP, and attached it to a layer of embossed card stock. I tied white ribbon around the card.

I cut layers with the Stitched So Sweetly dies. I am not sure where the verse came from. Something that just retired in June...

I hope you enjoyed todays project.

Until next time,

Christmas Challenge

Hi Stampers!

I am still catching up from this spring.  Again, this is a card I made with what at the time was current stamp sets but they have since retired.

I used Flourishing Phrases to create this Christmas card challenge which was to use a non Christmas stamp set to create a Christmas card.  I had some gold glitter paper to cut Merry Christmas with some retired dies.

Now, I need to get caught up on the rest of these challenges.  If I do I will have all my Christmas cards completed before December.  I will be ahead this year for a change.

I hope you enjoyed todays projects.

Until next time.

Best Dressed Congratulations

Hi Stampers!

Like I said the other day, I’m playing catch up. Today’s card has Designer Series Paper and a stamp set that is retired.  If you’re like me, you probably still have some of the paper and you could substitute a verse. I am working on using my pretty paper.

  My dear friend has decided to go back to school and be an EMT. She loves shoes. In fact, she has a specific pair of red shoes and takes photos of the red shoes when she travels etc.. She calls her photo album “Traveling Adventures of the Red Shoes” 😉

Well, when I learned that she passed her final exams I knew what paper I had to use! 

I stamped the verse with black Staz-On ink on vellum.

The inside I stamped the background three times without re-inking  in between.  “You did it” was stamped in Tuxedo Black. My friend was so nervous that she was going to fail. The rest of us knew she wouldn’t.

I hope you enjoyed today’s card.

Until next time,

Umbrella of Hope

Hi Stampers!

I’ve missed you. I have been gone a LONG time.  I hope you have been adjusting to the “new normal”. My last school day was March 13 with students. Then through June we had remote learning and different programs to help students and their families. Things settled down for a little bit, now we’re getting ready to open schools in a few weeks so we are learning more ways to keep kids safe and healthy. 

Have you missed your everyday routine? I miss students, coworkers and high speed internet 😉

Here is a little umbrella card I made using Under My Umbrella. It is inspired by many paintings I’ve seen at painting parties. 

It was fun using the masking technique.  I used blender pens to colors these. One of my first attempts using blender pens. I will be building my collection. 

Everything can be ordered online.

Until next time,

August-December 2020 Mini Catalog

Hi Stampers!

Check out the new catalog!! Wait until you see all the new goodies.  You're going to love them! You can download the catalog or if you would like a paper copy let me know and I will get one to you asap.

 

 Enjoy!  I am working on cute samples to show you!

Until next time,